How to Plan Your Sauna
I've built commercial saunas, traditional cedar saunas, and the NorthUp. Most problems I see in finished saunas trace back to a few early decisions: room size, bench layout, stove choice, ventilation, and where the stove goes. Here's the order I'd work through them.
Not sure where you land? Book a free stove consult and we'll walk through it together.
Want the quick answer? Try the stove calculator. Enter your room, door and windows, and it shows the stoves that fit.
Step 1: Measure your room and find the cubic footage
Stoves are sized by the volume of air they heat, not the floor area. Measure the inside of the finished room:
Length × width × ceiling height = cubic feet
Example: a 6' × 7' room with a 7' ceiling is 6 × 7 × 7 = 294 cu ft.
- Measure to the finished interior walls, not the framing.
Step 2: Choose your ceiling height and bench layout
Ceiling height and bench height go together, so decide them at the same time.
Ceiling height. Seven-foot ceilings are a common size because they fit a lot of spaces and standard materials. Plenty of builders go taller, 8 or 9 feet or more, because heat rises: a taller room lets you raise the top bench higher, into hotter air, with more room for steam. The tradeoff is more volume to heat, which means a bigger stove.
Bench height. Set the top bench by the ceiling, not the floor. A good rule of thumb is about two fists of headroom above your head while you're seated on the top bench. Here's how to work it out:
- Sit on a flat chair and measure from the seat to the top of your head. That's your seated height.
- Add two fists stacked on top of your head.
- That total is the distance you want from the top bench surface to the ceiling.
Example: a seated height of 34" plus two fists of about 8" is 42". With a 7' (84") ceiling, the top bench sits about 42" off the floor. With an 8' (96") ceiling, it sits about 54" off the floor, and you'll want a lower bench or step to climb up.
- Plan for the tallest regular user.
- The top bench should sit above the top of the stove, so you're in the heat and your feet aren't in the cooler air near the floor.
- A lower bench doubles as a step and a cooler seat.
Step 3: Choose your door
Pick your door before you size the stove. Glass pulls heat out of the room, so a glass door changes your cubic footage. Either way, the door should swing out and never lock.
Option 1: Buy a pre-hung door. The easiest install, and glass makes a small room feel bigger. We carry two from PROSAUNAS, both pre-hung with left or right hinges:
- Frameless glass in Black Alder, Aspen or Thermo-Aspen, clear or tinted. The whole door is glass.
- Douglas Fir with insulated glass. A solid wood door with a dual-pane glass panel, so it holds heat better.
Option 2: Build your own. A solid wood door, usually cedar, adds nothing to your cubic footage. Keep it narrow, around 24", with a wood handle on the inside. Shop handles and hardware
Glass and cold surfaces add to your cubic footage. A good rule is about 4 cu ft for every square foot of glass, including windows, and bare stone or concrete walls. A full glass door adds roughly 50 to 80 cu ft. The stove calculator does the math for you.
Example: that 294 cu ft room with a 24" × 81" frameless glass door sizes like a 349 cu ft room. Add a 2' × 3' window (6 sq ft, about 24 cu ft) and it's about 373 cu ft.
Step 4: Choose electric or wood-fired
Electric is simple and consistent. Turn it on, and it's ready in 30 to 60 minutes. It needs a dedicated 240V circuit, usually 30 to 50 amps, and a controller. Plan on a licensed electrician.
Wood-fired gives a softer, deeper heat and works off-grid. It needs a chimney, clearances to combustibles, and more attention while you sauna. Most European stoves also need a 4.5" to 6" adapter to work with US chimney parts.
Shop electric stoves · Shop wood stoves
Step 5: Size your stove
Every stove we carry lists the room size it's rated for. Use your adjusted cubic footage from Step 3, and pick a stove where it lands in the middle of the range, not at the very top. An undersized stove runs flat out and never gets you good steam.
Use the stove calculator to do the math and see every stove that fits your room.
Step 6: Plan your ventilation
Good ventilation is the difference between a sauna that feels fresh and one that feels stuffy, even at the same temperature. You want fresh air coming in, moving past the stove, and leaving the room.
Wood-fired
- The fire pulls its combustion air from the room, so you need a fresh-air intake low, near or behind the stove.
- Put an exhaust vent high on the opposite side of the room, or low under the upper bench, so air moves across where people sit.
Electric
- Passive: an intake low near or below the heater, and an exhaust on the opposite wall. Air moves on its own as the room heats.
- Active: the same layout with a small exhaust fan, which gives steadier airflow. It's useful in tight or insulated rooms.
Use adjustable vents so you can close them down while the room heats up, then open them once you're in. Shop sauna vents
Step 7: Decide where the stove goes
- Near the door is common, so incoming air passes over the stove and heats up before it reaches the benches.
- Keep it out of the walkway and clear of the door swing, and follow the manufacturer's clearances to walls, benches, and the ceiling. They're listed on every stove page.
- Check it against your bench layout from Step 2, so the top bench sits above the stove.
- Make sure you can reach the rocks with a ladle without leaning over the stove.
Step 8: Get the right components
- Electric: a contactor box (indoor or outdoor) and a touchpad.
- Wood: chimney pipe, a chimney adapter if needed, and a heat shield or protective sheath where clearances are tight.
- Rocks: every stove we sell comes with two free boxes of Urban Wing sauna rocks (see the details). Check the stove page for how many boxes it holds.
Step 9: Finish the room
- Vapor barrier behind the interior walls and ceiling
- Vents, a door handle, hooks, and a backrest
- A bucket and ladle
Shop building supplies · Shop sauna accessories
Still have questions?
If you're buying a stove from us, I'll get on a free call and walk through your build: your space, your plans, and which stove actually fits. Schedule a free stove consult.
